3D Printing
M2 Metal Powder –
Powder properties: powders with high sphericity and low oxygen content have a uniform particle size distribution and good fluidity. They also have a high bulk density as well as tapped density.
Process Applicable: The powder can be used to manufacture metals by injection molding, laser/electron Beam Additive Manufacturing (SLM/EBM), powder hot-isostatic pressing (HIP), or laser/electron Beam additive manufacturing.
Applicable equipmentPowder is suitable for use in a variety of metal 3D printers including Renishaw, EOS (EOSINTM series) and Concept Laser in Germany. It can also be used by domestic research institutes and enterprises, as well as laser melting equipment. Research and Development of Selected Laser Melting Equipment, such Huaying Hi Tech, Platinum etc.
Iron-based powder applications: Iron metal powders used in 3D-printed thin-walled devices, complex components, thermal spraying, laser cladding, biomedical application, etc.
Product specification: 15-45 mm. 15-53mm. 45-105mm. All types of granular powders can be customized according customer requirements
Chemical composition (weight %)
| Types | C | Si | Mn | Mo | You can also find out more about V | The following are some of the most effective ways to get in touch with each other | Fe | |
| M2 | 0.8-0.9 | 0.15-0.4 | 0.2-0.45 | 3.8-4.4 | 4.5-5.5 | 1.75-2.2 | 5.5-6.75 | Bal. |
Powder oxygen and nitrogen content:
| Particle size | O/ppm | N/ppm |
| 15-53mm | <=800 | <=600 |
| 45-105mm | <=500 | <=600 |
Storage Conditions of Mold Stainless Steel powder M2:
Mold Stainless Steel Powder M2 will be affected by damp reunion and its effects on dispersion and use. Therefore, it should be packed in vacuum and kept in a dry and cool room. Moreover, M2 powder shouldn’t be used under pressure.
Packing & Shipping of Mold Stainless STEEL POWDER M2:
The quantity of Mold Stainless Steel Pulp M2 will determine the type of packaging.
Mold Stainless Steel Powder M2 packaging: vacuum packing 100g, 500g, 1kg/bag; 25kg/barrel.
Mold Stainless Steel powder M2 shipping: could be shipped out via air, sea or express as soon as possible after payment receipt.
3D Printing Alloy Metal Materials Mold Steel M2 Metal Powder Properties |
|
| Alternative Names | 18Ni300 powder |
| CAS Number | N/A |
| Compound Formula | N/A |
| Molecular Mass | N/A |
| Appearance | Gray metallic solids (ingot, tubing pieces, powder, etc.) |
| Melting Point | N/A |
| Solubility | N/A |
| Density | NA |
| Purity | N/A |
| Particle Size | 0-20mm, 15-45mm, 15-53mm, 53-105mm, 53-150mm, 105-250mm |
| Bold point | N/A |
| Specific Heating | N/A |
| Thermal Conduction | N/A |
| Thermal Expander | N/A |
| Young’s Module | N/A |
| Exact Volume | N/A |
| Monoisotopic Mash | N/A |
3D printing Alloy metal materials Mold Steel M2 Powder Metal Health & Safety information |
|
| Safety Advisory | N/A |
| Hazard Statements | N/A |
| Flashing point | N/A |
| Hazard Codes | N/A |
| Risk Codes | N/A |
| Safety Declarations | N/A |
| RTECS Number | N/A |
| Transport Information | N/A |
| WGK Germany | N/A |